GarrettCom MNS-6K Manual De Usuario

U P D A T I N G     S O F T W A R E   –   S T E P   2  

309 

 

145  - HyperTerminal screen showing the serial settings 

 

Network Access 

Prerequisites - a PC (or workstation/computer) with telnet software and the IP address of 
the Magnum 6K switch (or DNS name associated with the switch) to be upgraded.  
Access the Magnum 6K switch by using the telnet command. For example, if the switch 
has the IP address 192.168.10.11 the command is as shown in Figure 6 below. 

C:> 

 

Trying …..   connected… 

– Using telnet command to connect to a Magnum 6K switch with IP address 

 

 

If the telnet command does not work – check for network connectivity 
(using the ‘ping’ command). Please ensure that a personal firewall or other 
firewall settings are not affecting ping or telnet commands. If telnet services 
fail

 then the alternative is to locate the Magnum 6K switch and update the 

MNS-6K software through the serial port following the serial update 

process described in this document.

 

Saving the Configuration 

Before saving the configuration, please ensure that one of the three capabilities listed below are 
available 

                                                                          

10

 telnet services can fail due to a number of reasons. Please check with your system and/or network administrator for 

additional help.