GarrettCom MNS-6K Manual De Usuario

M A G N U M   6 K   S W I T C H E S ,     M N S - 6 K   U S E R   G U I D E  
 

switch is put on a network and the specific configurations are loaded from a 
centralized BootP server  

 

 

 

  Save Configuration and Restart System 

 

  Save Configuration and Restart System 

 

  Network application image download is enabled. 

 

  Network application config download is disabled. 

  Save Configuration and Restart System 

 Changing the boot mode of the switch

Using Telnet 

 

 

By default, the telnet client is enabled on the GarrettCom Magnum 6K family of switches. 

MNS-6K supports five simultaneous sessions on a switch – four telnet sessions and one 

console session. This allows many users to view, discuss or edit changes to the MNS-6K. 

This also becomes useful as two remote people want to view the commands and other 

settings on the switch. The telnet client can be disabled by using the “telnet disable” 

command. Telnet can also be disabled for a specific user by using the “useraccess” 

command discussed in 

. 

 
Multiple telnet sessions started from the CLI interface or the command line are serviced 
by MNS-6K in a round robin fashion – i.e. one session after another. If one telnet session 
started from MNS-6K interface is downloading a file, the other windows will not be 
serviced till the file transfer is completed. 

 
Syntax telnet <enable|disable> 
 

Access to Telnet already enabled 

 Changing telnet access – note in this case, the enable command was repeated without 

 

The  ‘show console’ command can show the status of the telnet client as well as other 

console parameters. 
 
 
 

38