Fujitsu FD-1016AT Manual De Usuario
11
● Rear
Panel
8-Port KWM Switch
(1) (2) (3) (4) (5) (6) (7)
8-port KVM Switch rear panel
(1) Power cable connector
Connect to a 100 V AC electric outlet.
(2) Connectors for servers
[1 through 8]
Connect each port (1 through 8) on this device to the relevant host’s keyboard,
mouse and monitor connectors with the special cable.
mouse and monitor connectors with the special cable.
(3) DIP Switches
Use for a variety of settings. Numbered from left side while facing the switches
starting from 1, 2…8; up is on and down is off.
starting from 1, 2…8; up is on and down is off.
(4) Connector for [Sun]
Connect to a SUN keyboard/mouse.
(Do not connect to the Console Drawer.)
(Do not connect to the Console Drawer.)
(5) Keyboard connector
Connect a PS/2 keyboard connector (purple).
(6) Mouse connector
Connect a PS/2 mouse connector (green).
(7) Monitor Connector
Connect a monitor.
16-Port KVM Switch
16-port KVM Switch rear panel