Foundry Networks 2402CF Manual De Usuario
)HEUXDU\
)RXQGU\1HWZRUNV,QF
L
C
OMPLIANCES
FCC - Class A
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
interference to radio communications. It has been tested and found to comply
with the limits for a Class A computing device pursuant to Subpart B of Part 15 of
FCC Rules, which are designed to provide reasonable protection against such
interference when operated in a commercial environment. Operation of this
equipment in a residential area is likely to cause interference, in which case the
user, at his own expense, will be required to take whatever measures may be
required to correct the interference. You are cautioned that changes or
modifications not expressly approved by the party responsible for compliance
could void your authority to operate the equipment.
not installed and used in accordance with the instruction manual, may cause
interference to radio communications. It has been tested and found to comply
with the limits for a Class A computing device pursuant to Subpart B of Part 15 of
FCC Rules, which are designed to provide reasonable protection against such
interference when operated in a commercial environment. Operation of this
equipment in a residential area is likely to cause interference, in which case the
user, at his own expense, will be required to take whatever measures may be
required to correct the interference. You are cautioned that changes or
modifications not expressly approved by the party responsible for compliance
could void your authority to operate the equipment.
You may use unshielded twisted-pair (UTP) cable for RJ-45
connections—Category 3 or greater for 10 Mbps connections, Category 5 for 100
Mbps connections and Category 5 or 5e for 1000 Mbps connections. Use 50/125 or
62.5/125 micron multimode fiber optic cable, or 9/125 micron single-mode cable,
for SFP transceiver connections.
connections—Category 3 or greater for 10 Mbps connections, Category 5 for 100
Mbps connections and Category 5 or 5e for 1000 Mbps connections. Use 50/125 or
62.5/125 micron multimode fiber optic cable, or 9/125 micron single-mode cable,
for SFP transceiver connections.
Warnings:
1. Wear an anti-static wrist strap or take other suitable measures to
prevent electrostatic discharge when handling this equipment.
2.
When connecting this switch to a power outlet, connect the field
ground lead on the tri-pole power plug to a valid earth ground
line to prevent electrical hazards.
ground lead on the tri-pole power plug to a valid earth ground
line to prevent electrical hazards.
EC Conformance Declaration - Class A
Contact Foundry Networks at:
Foundry Networks Inc.
2100 Gold Street
P.O. Box 649100
San Jose, CA 95164-9100
2100 Gold Street
P.O. Box 649100
San Jose, CA 95164-9100
This information technology equipment complies with the requirements of the
Council Directive 89/336/EEC on the Approximation of the laws of the Member
States relating to Electromagnetic Compatibility and 73/23/EEC for electrical
equipment used within certain voltage limits and the Amendment Directive 93/
Council Directive 89/336/EEC on the Approximation of the laws of the Member
States relating to Electromagnetic Compatibility and 73/23/EEC for electrical
equipment used within certain voltage limits and the Amendment Directive 93/