Furuno VR-3000 Manual De Usuario
1
1. OPERATION
1.1 Overview
The VR-3000/VR-3000S consists of Data Collecting Unit (DCU), Data Recording Unit (DRU),
Remote Alarm Panel (RAP), Junction Box (JB, optional supply with VR-3000S) and bridge
microphone units. The VDR system continuously stores data from the past 12 hours onto the
Flash Memory in the capsule, erasing the oldest data stored as new data is recorded. The data to
be recorded includes the following:
Remote Alarm Panel (RAP), Junction Box (JB, optional supply with VR-3000S) and bridge
microphone units. The VDR system continuously stores data from the past 12 hours onto the
Flash Memory in the capsule, erasing the oldest data stored as new data is recorded. The data to
be recorded includes the following:
Parameters to be recorded
IEC 61162 formatter
Notes
Date and time
ZDA
Ship’s position and datum used
GNS and DTM
Speed (water and/or ground)
VBW
Heading (true)
HDT
Heading (magnetic)
HDG
AIS-VHF data-link message
VDM
AIS-VHF data-link own-vessel message
VDO
Depth (echo sounder)
DPT
Alarms ALR
No requirement for S-VDR to
send alarm messages
send alarm messages
Rudder order/response manual
RSA
Rudder order/response automatic
HTC, HTD
Engine order/response
RPM, XDR
Hull openings, watertight doors
XDR
Accelerations and hull stress
XDR, ALR
Wind speed and direction
MWV
VDR alarm output
$VRALR
Radar data
Bridge audio
VHF communication audio
Power supply precaution
If ship’s mains power source (100-230 VAC) and emergency source fail, the VR-3000/VR-3000S
continues to record bridge audio for 2 h from backup batteries. When using the backup batteries,
suspend power to the IF-8530 Junction box..
continues to record bridge audio for 2 h from backup batteries. When using the backup batteries,
suspend power to the IF-8530 Junction box..