Avaya C460 Manual De Usuario
Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide
197
show port redundancy
User level: read-only, read-write, admin.
Use the show port redundancy command to display information about software
port redundancy schemes defined for the switch.
Use the show port redundancy command to display information about software
port redundancy schemes defined for the switch.
The syntax for this command is:
show port redundancy
Example:
show port trap
User level: read-only, read-write, admin.
Use the show port trap command to display information on SNMP generic
link up/down traps sent for a specific port.
Use the show port trap command to display information on SNMP generic
link up/down traps sent for a specific port.
The syntax for this command is:
show port trap
[<module>[/<port>]]
Example:
C460-1> show port redundancy
Redundancy Name Primary Port Secondary Port Status
----------------- -------------- ---------------- --------
gregory 3/48 3/47 secondary
amir 3/46 3/45 secondary
lior 3/1 3/2 primary
arie 3/34 3/33 secondary
Minimum Time between Switchovers: 1
Switchback interval: 3
module
(Optional)
(Optional)
Number of the module (3-6). If you do not specify a number,
the ports on all the modules are shown.
the ports on all the modules are shown.
port
(Optional)
(Optional)
Number of the port on the module. If you do not specify a
number, all the ports on the module are shown.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on module 4.
number, all the ports on the module are shown.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on module 4.
C460-1> show port trap 4/1
Port 4/1 up/down trap is disabled