Avaya M770 Manual De Usuario

Chapter 10

Managing PNNI Routing

Avaya M770 ATM Switch User’s Guide

161

Set PNNI node timers to default values

Use the following command to set the PNNI node timers to their default values.

Set PNNI node timers

Use the following command to set PNNI node timers.

Command:

M15-155s8:/>route pnni config timers default <index(All=99)> 

<level>

Parameters:

<index> the index of the timer , to set all timers type 99

Output: 

Note: This request will set value for timers , according to 

the index parameter.

Changes will take effect immediately.

Command:

M15-155s8:/>route pnni config timers set  <index> <value> 

<level>

Parameters:

<index> the index of the timer as appear in the ‘show’ screen.

<value> the value that the selected timer will get.

<level>  Internal level number: 1 is the lowest (physical) 

node.

Examples: 

route pnni config timers set 1 15 1

Note: This request will set value for timers , according to 

the index parameter.

Changes will take effect immediately.