Avaya M770 Manual De Usuario
Chapter 16
Managing an ELAN
212
Avaya M770 ATM Switch User’s Guide
To list or change the ELAN names for the default ELAN names, see Specified ELAN
Defaults in the LECS in Chapter 14, “Managing the LECS”.
Defaults in the LECS in Chapter 14, “Managing the LECS”.
Listing all ELANs known to the local LECS
In an M770 ATM Switch LECS, the LECS will support 64 ELANs including the pre-
defined ELAN. The name “default” supports Ethernet ELANs.
If the ELAN mode has been determined by the first LES to register with the ELAN,
then an asterisk (*) will be displayed.
An asterisk near the LANE2 capability parameter indicates that it was set to “auto”
and the capability has been set by the first LES to register.
An asterisk near the ELAN-ID indicates that it has been calculated by the software.
To display a list of ELANs that are known to the local LECS, enter the
defined ELAN. The name “default” supports Ethernet ELANs.
If the ELAN mode has been determined by the first LES to register with the ELAN,
then an asterisk (*) will be displayed.
An asterisk near the LANE2 capability parameter indicates that it was set to “auto”
and the capability has been set by the first LES to register.
An asterisk near the ELAN-ID indicates that it has been calculated by the software.
To display a list of ELANs that are known to the local LECS, enter the
lane elan
show
command:
Creating a New ELAN
You can define up to 64 ELANs that will be known to the LECS on an M770 ATM
Switch.
If the LES is hosted in a device other than the M770 ATM Switch, then you must
specify the ATM address where the LES will be located.
If the M770 ATM Switch will host the LES, then you should set the <LES-id> to
“auto”. This will enable the LES to automatically register with the ELAN. For
information about the automatic LES address determination method, see the Section
“The LES and BUS in an Avaya M770 ATM Switch”, in Chapter 13, “LANE
Services”.
Switch.
If the LES is hosted in a device other than the M770 ATM Switch, then you must
specify the ATM address where the LES will be located.
If the M770 ATM Switch will host the LES, then you should set the <LES-id> to
“auto”. This will enable the LES to automatically register with the ELAN. For
information about the automatic LES address determination method, see the Section
“The LES and BUS in an Avaya M770 ATM Switch”, in Chapter 13, “LANE
Services”.
Command:
M15-155s8:/>lane elan show
Output:
Name : default
Type
: Ethernet
Security
: Open
Max. Number of LESs
: 5
LES address formula
: Round robin
LANE2 Capable
: yes*
ELAN-ID
: 4528*
LES Mode and Address(es) : Distributed*
at 39.03.00.00.00.00.00.00.00.00.00.00.00.00.40.0D.87.01.B8.05
at 39.04.01.00.00.00.00.00.00.00.00.00.00.00.40.0D.87.00.04.05
at 39.04.02.00.00.00.00.00.00.00.00.00.00.00.40.0D.87.00.16.05
at 39.04.01.00.00.00.00.00.00.00.00.00.00.00.40.0D.87.01.23.05