Avaya M770 Manual De Usuario

Chapter 18

Managing Events

238

Avaya M770 ATM Switch User’s Guide

To set the event logging priority level, use the

event log

 

command. 

When an event occurs the switch will dispatch a trap, via SNMP, to all attached 
SNMP network management stations. All events in the M770 ATM Switch are 
assigned a priority level between 1 and 16, in order of severity. For examples of 
priority levels, see Assigning an Event Priority Levelearlier in this chapter. 
You can specify a priority level for event traps that will be dispatched. Once you 
have assigned a priority level, all event traps assigned with this priority, or higher, 
that occur on the switch will be reported. By default, all events on the M770 ATM 
Switch are dispatched as traps. 
To display the event trap priority level, use the

event trap

 

command. 

To set the event trap priority level, use the 

event trap 

command. 

Command:

M15-155s8:/>event log [ <number> | all | none ]

Parameters: 

<number>

An event priority level is assigned, where events with the 
same priority or higher will be logged.

all

All events will be logged. This can cause the event log to fill 
up quickly.

none

No events will be logged.

Command:

M15-155s8:/>event trap

Output:

All events are being dispatched as traps.

Command:

M15-155s8:/>event trap [ <number> | all | none ]

Parameters: 

<number>

An event priority level is assigned, where events 
with the same priority or higher will be 
dispatched via SNMP traps.

all

All events will be dispatched via SNMP traps.

none

No events will be dispatched via SNMP traps.