Avaya M770 Manual De Usuario
Chapter 6
Managing Virtual Ports
Avaya M770 ATM Switch User’s Guide
65
bandwidth assigned for a vport is 104268 CPS divided by 8. However, if we were
using PLCP, the default bandwidth would be 95990 CPS divided by 8.
using PLCP, the default bandwidth would be 95990 CPS divided by 8.
Deleting a virtual port
To delete a virtual port, use the
vport delete
command.
Disabling a virtual port
Before any virtual port parameters can be changed or reset you will have to disable
the virtual port.
To disable a virtual port, use the
the virtual port.
To disable a virtual port, use the
vport disable
command.
Enabling a virtual port
To enable a virtual port, use the
vport enable
command.
Command:
M15-155s8:/>vport delete <vport id>
Example:
M15-155s8:/>vport delete 8.1.4
Parameter:
<vport id>
The virtual port in the form <slot>.<port>.<virtual port
number>.
number>.
Command:
M15-155s8:/>vport disable <vport id>
Example:
M15-155s8:/>vport disable 8.1.0
Parameter:
<vport id>
The virtual port in the form <slot>.<port>.<virtual port number>.
Command:
M15-155s8:/>vport enable <vport id>
Example:
M15-155s8:/>vport enable 8.1.0
Parameter:
<vport id>
The virtual port in the form <slot>.<port>.<virtual port number>.