Hangzhou Hechang Trading S3100-SI Manual De Usuario
Quick Start
H3C S3100-SI Series Ethernet Switches
H3C S3100-SI Series Ethernet Switches
Chapter 3 Installation
3-16
Note:
When connecting a PC to a powered-on switch, you are
recommended to connect the DB-9 connector of the Console cable to
the PC before connecting the RJ45 connector to the switch. When
disconnecting a PC from a powered-on switch, you are recommended
to disconnect the DB-9 connector of the Console cable from the PC
after disconnecting the RJ45 connector from the switch.
recommended to connect the DB-9 connector of the Console cable to
the PC before connecting the RJ45 connector to the switch. When
disconnecting a PC from a powered-on switch, you are recommended
to disconnect the DB-9 connector of the Console cable from the PC
after disconnecting the RJ45 connector from the switch.
3.6 Installation Verification
After completing the installation, check that:
z
The correct power is used.
z
The grounding wire is connected.
z
Both Console cable and power cord are properly connected.
z
All the interface cables are wired indoors. If there is any
cable wired outdoors, verify that socket strip with lightning
protection and lightning arresters for network ports have
been properly connected.
cable wired outdoors, verify that socket strip with lightning
protection and lightning arresters for network ports have
been properly connected.