Avocent 3008 Manual De Usuario

Descargar
Página de 112
85
Appendices
Appendix A: Flash Upgrades
The AutoView 3008/3016 switch Flash upgrade feature allows you to update your appliance with 
the latest firmware available. This update can be performed using a Trivial File Transfer Protocol 
(TFTP) server, File Transfer Protocol (FTP) or using the OBWI.
After the Flash memory is reprogrammed with the upgrade, the AutoView 3008/3016 switch 
performs a soft reset, which terminates all IQ module sessions. A target device experiencing an IQ 
module firmware update may not display, or may display as disconnected. The target device will 
appear normally when the Flash update is completed.
NOTE: During an IQ module upgrade, the IQ module status indicator in the OSCAR interface Main dialog box is 
yellow.
CAUTION: Disconnecting an IQ module during a firmware update or cycling power to the target device will 
render the module inoperable and require the IQ module to be returned to the factory for repair.
Using the Console menu interface
To upgrade the AutoView 3008/3016 switch firmware using the Console menu 
interface:
NOTE: If you do not have a TFTP server, you can find several shareware and freeware programs on the Internet 
that you can download and install.
1.
Visit http://www.avocent.com/support
 
and download the latest Flash firmware from Avocent.
2.
Save the Flash upgrade file to the appropriate directory on the TFTP or FTP server.
3.
Use the DB9 M/F serial cable to connect a terminal or PC running terminal emulation software 
(such as HyperTerminal) to the SETUP, CONSOLE or 10101 port on the back panel of the 
AutoView 3008/3016 switch. The terminal should be set to 9600 bps, 8 bits, 1 stop bit, no 
parity and no flow control. 
4.
If the AutoView 3008/3016 switch is not on, turn it on now. After approximately one minute, 
press any key to access the Console Main menu.
5.
Select the Firmware Management option from the Console Main menu.
NOTE: The current version of your firmware will be displayed on the Firmware Management menu.
6.
Type 
and press 
Enter 
to access Flash Download.
7.
Type the IP address of your TFTP server and press 
Enter
.
8.
Enter the name of the file that you downloaded from the Avocent web site.
9.
Confirm the TFTP download by typing a 
or 
yes 
and pressing 
Enter
.
A P P E N D I C E S