John Deere SB1174 Manual De Usuario

OM 0408SB1174-A 

13

See Dealer for Tractor Preparation information.  

The snowblower is assembled at the factory except for the parts in the hardware bag provided with the 
snowblower, the chute and the options if appropriate. Use the present manual and lay out all parts for 
assembly. Separate bolts and nuts into various sizes. After assembly, torque all the bolts according to the 
Torque Specification Table at the end of manual. 

1: Remove the 1/4" NC x 1 1/4", the 

flat washer, the lockwasher and the nut 
(items 1-2-3-5) that fixes the sign (item 4) to 
the frame.  Save the hardware. 

2: Install the sign support (item 1) on 

the snowblower with two 1/4" NC x 1" bolts, 
two 1/4" flat washers and two 1/4" NC nylon 
insert nuts (items 2-3-4). 

3. Figure 2:  Using the hardware previously 

removed, attach the SMV sign (item 5) with, 
a 1/4" NC x 1" bolt (item 6), a 1/4" NC x 1 
1/4" bolt (item 7), two flat washers (item 8), 
a 1/4" nylon insert nut (item 9), a 1/4" 
lockwasher (item 10) and a 1/4" hex nut 
(item 11).  

4.  Remove the black protective film from the 

SMV sign.