Brocade Communications Systems 5100 Manual De Usuario
EZSwitchSetup Administrator’s Guide
33
53-1002157-01
Viewing switch information
3
If the entire port icon is blue, the port is buffer-limited. (A port is operating in buffer-limited mode
when the number of buffers allocated to the port is less than the number of buffers needed by the
port to utilize the port at full bandwidth.)
when the number of buffers allocated to the port is less than the number of buffers needed by the
port to utilize the port at full bandwidth.)
If a group of port icons is gray (unavailable), those ports are not licensed.
shows port icons and associated LEDs from a Brocade 6510 switch. The layout is similar
for all switches, but varies according to switch type.
FIGURE 27
Port and LED status color-coded information in the port icon in Switch View
Hover the cursor over the port icon to view the port number, port type, and port status, as shown in
FIGURE 28
Displaying port information
Hover the cursor over the LEDs to view details about the port state, as shown in
FIGURE 29
Port State LEDs
Switch Information tab
The Switch Information tab is the default information tab under Port Information, Switch
Information on the Switch View (
Information on the Switch View (
on page 34). Detailed switch information is displayed as
a list of properties, which may be viewed, copied, or exported by category.
The background color of the
port icon indicates port status.
port icon indicates port status.
The blinking LEDs indicate port status.