Brocade Communications Systems IPMC5000PEF Manual De Usuario

Enter ve and its number , or ethernet and its port-address to display information for a specific virtual
routing interface, or ethernet interface.

The tunnelnum parameter specifies a GRE tunnel interface that is being configured. The GRE tunnel
interface is enabled under the router PIM configuration.

Entering an address for group-address displays information for a specified group on the specified
interface.

The report shows the following information:

Output of show ip igmp interface 

Intf

The virtual interface on which IGMP is enabled.

Port

The physical port on which IGMP is enabled.

Groups

The number of groups that this interface or port has membership.

Version

Oper

The IGMP version that is operating on the interface.

Cfg

The IGMP version that is configured for this interface.

Querier

Where the Querier resides:

The IP address of the router where the querier is located

or

Self - if the querier is on the same router as the intf or port.

Max response

oQrr

Other Querier present timer.

GenQ

General Query timer

V1Rtr

Whether IGMPv1 is present on the intf or port.

V2Rtr

Whether IGMPv2 is present on the intf or port.

Tracking

Fast tracking status:

Enabled

or

Disabled

IPv4 Multicast Protocols