Brocade Communications Systems IPMC5000PEF Manual De Usuario

  RP: 1be::11:21

    group prefixes:

    ff00:: / 8

  Candidate-RP-advertisement period: 60

This example shows information displayed on a device that is a candidate RP. The following example
shows the message displayed on a device that is not a candidate RP.

device# show ipv6 pim rp-candidate

This system is not a Candidate-RP.

Syntax: show ipv6 pim [ vrf vrf-name ] rp-candidate

The vrf parameter allows you to display IPv6 candidate RP information for the VRF instance identified
by the vrf-name variable.

The following table displays the output from the show ipv6 pim rp-candidate command.

Output from the show ipv6 pim rp-candidate command

Candidate-RP-advertisement
in

Indicates how many seconds will pass before the BSR sends its next RP
message.

NOTE
This field appears only if this device is a candidate RP.

RP

Indicates the IPv6 address of the Rendezvous Point (RP).

NOTE
This field appears only if this device is a candidate RP.

group prefixes

Indicates the multicast groups for which the RP listed by the previous field is a
candidate RP.

NOTE
This field appears only if this device is a candidate RP.

Candidate-RP-advertisement
period

Indicates how frequently the BSR sends candidate RP advertisement messages.

NOTE
This field appears only if this device is a candidate RP.

Displaying RP-to-group mappings

To display RP-to-group-mappings, enter the show ipv6 pim rp-map command at any CLI level.

Brocade#show ipv6 pim rp-map

Number of group-to-RP mappings: 3

-------------------------------------------------------------------------------

S.No  Group address   RP address

Displaying RP-to-group mappings