Brocade Communications Systems IPMC5000PEF Manual De Usuario

Output from the show ipv6 mld traffic command (Continued)

Is_EX

Number of source addresses that were excluded in the traffic.

ToIN

Number of times the interface mode changed from exclude to include.

ToEX

Number of times the interface mode changed from include to exclude.

ALLOW

Number of times that additional source addresses were allowed or denied on the interface.

BLK

Number of times that sources were removed from an interface.

Clearing IPv6 MLD traffic

To clear counters on IPv6 MLD traffic, enter the following command.

device# clear ipv6 mld traffic

Syntax: clear ipv6 mld [ vrf vrf-name ] traffic

Use the vrf option to clear counters on IPv6 MLD traffic for a VRF instance specified by the vrf-name
variable.

Clearing the IPv6 MLD group membership table cache

You can clear the IPv6 PIM group membership table cache using the following command.

device# clear ipv6 pim cache

Syntax: clear ipv6 pim [ vrf vrf-name ] cache

Use the vrf option to clear the IPv6 PIM group membership table cache for a VRF instance specified
by the vrf-name variable.

IPv6 Multicast Boundaries

The Multicast Boundary feature is designed to selectively allow or disallow multicast flows to
configured interfaces.

The ipv6 multicast-boundary command allows you to configure a boundary on PIM enabled interface
by defining which multicast groups may not forward packets over a specified interface. This includes
incoming and outgoing packets. By default, all interfaces that are enabled for multicast are eligible to
participate in a multicast flow provided they meet the multicast routing protocol’s criteria for
participating in a flow.

Clearing IPv6 MLD traffic