Brocade Communications Systems IPMC5000PEF Manual De Usuario

Usage Guidelines

NOTE
This command is supported only on ICX 6650 devices.

The no form of this command enables the flooding of unregistered IPv6 multicast frames in an MLD-
snooping-enabled VLAN.

After the hardware forwarding database (FDB) entry is made, the multicast traffic is switched only to the
VLAN hosts that are members of the multicast group. This can avoid congestion and loss of traffic on
the ports that have not subscribed to this IPv6 multicast traffic.

Examples

The following example shows the disabling of flooding of unregistered IPv6 multicast frames.

Brocade(config)# ipv6 multicast disable-flooding

History

08.0.01

This command was introduced.

route-precedence

Configures a table that specifies the order in which routes are selected for multicast.

Syntax

route-precedence { [ mc-non-default | none ] | [ mc-default | none ] | [ uc-non-default | none ] | [ uc-
default | none ] }

Command Default

The default is route-precedence mc-non-default mc-default uc-non-default uc-default.

Parameters

Specifies precedence for a non-default multicast route table (mRTM).

Specifies that certain types of route be ignored.

Specifies precedence for an mRTM.

Specifies precedence for a non-default unicast route table (uRTM).

Specifies precedence for a uRTM.

Modes

PIM configuration mode

Usage Guidelines

The no form of this command removes the configuration and restores the default route precedence
settings.

route-precedence