Brocade Communications Systems IPMC5000PEF Manual De Usuario

(abcd:ef50 0:100): The lowest 32 bits of source and group. It is displayed in XXXX:XXXX hex format. Here

XXXX is a 16-bit hex number.

cnt

The number of packets processed in software.

OIF

Output interfaces.

age

The mcache age in seconds. The mcache is reset to 0 if traffic continues to arrive, otherwise
it is aged out when it reaches the time defined by 

.

uptime

The up time of this mcache in seconds.

vidx

The vidx is shared among mcaches using the same output interfaces. The vidx specifies the
output port list, which shows the index. Valid range is from 4096 to 8191.

ref-cnt

The number of mcaches using this vidx.

To display information about the software resources used, enter the following command.

device#show ipv6 multicast resource

                      alloc in-use  avail get-fail    limit  get-mem  size init

mld group               512      9    503        0    32000      272    28  256

mld phy port           1024     16   1008        0   200000      279    21 1024

snoop group hash        512      9    503        0    59392      272    20  256

.... Entries deleted

total pool memory 194432 bytes

has total 1 forwarding hash

Available vidx: 4061

Syntax: show ipv6 multicast resource

The following table describes the output from the show ipv6 multicast resource command.

alloc

The allocated number of units.

in-use

The number of units which are currently used.

avail

The number of available units.

get-fail

The number of resource failures

It is important to pay close attention to this field.

limit

The upper limit of this expandable field. The MLD group limit is configured using the 

 command. The snoop mcache entry limit is configured using the

 command.

IPv6 Multicast Traffic Reduction