Brocade Communications Systems 53-1001761-01 Manual De Usuario

Flash file management commands

14

switch#copy flash://config_filename startup-config

CEE configuration management commands

 lists the common CEE configuration management commands.

Flash file management commands

 describes the common tasks used to manage the Flash files on the Brocade 8000 switch. 

The Converged Enhanced Ethernet Command Reference contains complete information on all 
available CLI commands.

NOTE
Use of the flash:// prefix is optional.

TABLE 23

CEE configuration management commands 

Task

Command

Write the current running configuration file to 
the startup configuration file. 
NOTE: If you enter y at the prompt, the 

running configuration file overwrites 
the startup configuration file. If you 
enter n at the prompt, the startup 
configuration file is not overwritten.

switch#copy running-config startup-config

Overwrite the startup config file (y/n): y

Copy the startup configuration file to the 
running configuration file.

switch#copy startup-config running-config

Erase the startup configuration file. 
NOTE: This command does not affect the 

running configuration file.

switch#write erase

Copy the running configuration file to the 
archive folder on an FTP server.

switch#copy running-config 

Copy a stored startup configuration file in 
Flash to the running configuration.

switch#copy flash://test_filename 

Copy a configuration file from an FTP server to 
the startup configuration.

switch#copy 

Display the contents of the running 
configuration file.

switch#show running-config

TABLE 24

CEE Flash memory file management commands 

Task

Command

List the files in the Flash memory directory. 

switch#dir

Delete a file from the Flash memory directory.

switch#delete flash://example_filename