Brocade Communications Systems 53-1001761-01 Manual De Usuario

Configuring protocol-based VLAN classifier rules

4

NOTE

Multiple VLAN classifier rules can be applied per interface provided the resulting VLAN IDs are 
unique for the different rules.

802.1Q protocol-based VLANs apply only to untagged frames, or frames with priority tagging. 

With both Ethernet-II and 802.2 SNAP encapsulated frames, the following protocol types are 
supported:

•

Ethernet hexadecimal (0x0000 through 0xffff)

•

Address Resolution Protocol (ARP)

•

Fibre Channel over Ethernet (FCoE)

•

FCoE Initialization Protocol (FIP)

•

IP version 6 (IPv6)

NOTE
For complete information on all available VLAN classifier rule options, see the Converged Enhanced 
Ethernet Command Reference.

Configuring a VLAN classifier rule

To configure a protocol-based VLAN classifier rule, perform the following steps from Privileged 
EXEC mode.

1. Enter the configure terminal command to access global configuration mode. 

2. Enter the vlan classifier rule command to configure a protocol-based VLAN classifier rule. 

switch(config)#vlan classifier rule 1 proto fcoe encap ethv2

Configuring MAC address-based VLAN classifier rules

To configure a MAC address-based VLAN classifier rule, perform the following steps from Privileged 
EXEC mode.

1. Enter the configure terminal command to access global configuration mode. 

2. Enter the vlan classifier rule command to configure a MAC address-based VLAN classifier rule. 

switch(config)#vlan classifier rule 5 mac 0008.744c.7fid

Deleting a VLAN classifier rule

VLAN classifier groups (1 through 16) can contain any number of VLAN classifier rules. 

To configure a VLAN classifier group and remove a VLAN classifier rule, perform the following steps 
from Privileged EXEC mode.

1. Enter the configure terminal command to access global configuration mode. 

2. Specify a VLAN classifier group and delete a rule. 

switch(config)#vlan classifier group 1 delete rule 1