Brocade Communications Systems 53-1001762-01 Manual De Usuario

spanning-tree hello-time

9

spanning-tree hello-time

Configures the hello-time in seconds on the interface.

Synopsis

spanning-tree hello-time seconds

no spanning-tree hello-time

Operands

Sets the interval between the hello Bridge Protocol Data Units (BPDUs) sent 
by the root switch configuration messages. The range of valid values 1-10.

Defaults

The default is 2 seconds.

Command

Modes

Interface configuration mode

Description

Use this command to set the interval time between the BPDUs sent by the root switch. Use the no 
spanning-tree hello-time command to return to the default setting.This command is only for MSTP. 

Usage

Guidelines

Changing the hello-time affects all spanning-tree instances. The max-age setting must be greater 
than the hello-time setting.

Examples

To set the hello time to 5 seconds:

switch(conf-if-te-0/1)#spanning-tree hello-time 5

See Also

forward-delay, max-age, show spanning-tree