Brocade Communications Systems 53-1001762-01 Manual De Usuario

Chapter

4

Interface Commands

clear counters

Clears statistics on all interfaces on the switch.

Synopsis

clear counters {all | access-list mac access_list_name | [interface port-channel number | 
tengigabitethernet slot/port | slot-id number] }

Operands

all

Specifies to clear statistics on all interfaces.

access-list mac access_list_name

Specifies the name of the MAC access list.

interface 

Use this keyword to specify any of the following interfaces:

port-channel number

Specifies the port-channel number. The range of valid values is 1-63.

tengigabitethernet 

Specifies a valid 10 Gbps Ethernet interface.

Specifies a valid slot number.

Specifies a valid port number.

slot-id number Specifies the slot number of the linecard. For the Brocade 8000 switch, the 

slot number is always 0 (zero).

Description

Use this command to clear statistics on one or on all interfaces.

Defaults

There are no default configurations for this command.

Command

Modes

Privileged EXEC mode

User Guidelines

The clear counters all command does not clear counters for any of the protocol daemon stats like 
LLDP, LACP, MSTP, and so on.

Example

To clear the statistics for 10 Gbps Ethernet interface 0/1:

switch#clear counters interface tengigabitethernet 0/1

To clear the statistics for MAC access list named “test”:

switch#clear counters access-list mac test

To clear the statistics for all the interfaces on the linecard in slot 0 (zero):

switch#clear counters slot-id 0