Brocade Communications Systems 2.1 Manual De Usuario

Chapter

5

Brocade VDX 6720 Hardware Reference Manual

In this chapter

The updates in this chapter are for the VDX Hardware Reference Manual, part number: 
53-10002084-04, published March 2012.

•

•

Chapter 4, Brocade VDX 6720 Operation

Under the heading “Brocade VDX 6720 management” on page 33, replace Table 5 with the 
following information.

TABLE 5

Management options for the Brocade VDX 6720

Chapter 5, FRU Removal and Replacement Procedures

Under the heading “Replacing the power supply and fan assembly” on page 40, add a step after 
step 5 and before the paragraph that says “"You can display the power supply and fan assembly 
status using the following commands from the CLI:”

Step 6. If you have changed the airflow direction in the chassis by installing two FRUs with a new 

airflow direction, you must run the command chassis fan airflow-direction 
[port-side-direction], where the [port-side-direction] operands are either port-side-intake or 
port-side-exhaust, depending on which direction the airflow is directed.

switch# chassis fan airflow-direction port-side-exhaust 

Previous configuration : port-side-intake

Current configuration  : port-side-exhaust

System fan airflow-direction changes will be effective after reboot!!

Management tool

Out-of-band support

In-band support

Command line interface (CLI)
Up to two admin sessions and four user sessions simultaneously. 
For more information, refer to the Network OS Administrator’s 
Guide and the Brocade Network OS Command Reference.

Ethernet or serial 
(console port) 
connection

In standalone mode 
only. Not available in 
VCS mode.

Standard SNMP applications
For information, refer to the Network OS Administrator’s Guide 
and the Brocade Network OS MIB Reference.

Ethernet or serial 
(console port) 
connection

N/A

Brocade Network Advisor
For information, refer to the Brocade Network Advisor SAN+IP 
User Manual.

Ethernet (preferred) 
or serial (console 
port) connection

N/A