Black Box KV22008E Manual De Usuario
CHAPTER 3: INSTALLATION
15
Figure 3-2. Basic ServSelect III Switch Configuration
To connect a server using a SAM:
1.
Locate the SAMs for your ServSelect III switch.
2.
Attach the appropriately color-coded cable ends to the keyboard, monitor and mouse ports
on the first server you will be connecting to the appliance.
on the first server you will be connecting to the appliance.
3.
Attach one end of a CAT 5 cable to the RJ45 connector on the SAM.
4.
Connect the other end of the CAT 5 cable to the desired port on the back of your
ServSelect III switch.
ServSelect III switch.
5.
Repeat steps 2 through 4 for each server you wish to attach.
Analog User B
Configuration Port
(for updating firmware)
ServSelect III Switch
(KV22016A Shown)
(KV22016A Shown)
Servers 3-16
SAM
Analog User A
Server 2
ServSelect III cable
Server 1