Black Box KV120E Manual De Usuario

 

recommends that IP addresses be reserved for each unit and that they remain static 
while the appliances are connected to the network. 

Your ServSelect IP appliance ships with rackmounting brackets for easy integration 
into your rack. Before installing the appliance and other components in the rack 
cabinet, stabilize the rack in a permanent location. Install your equipment starting at 
the bottom of the rack cabinet, then work to the top. Avoid uneven loading or 
overloading of rack cabinets. 
To install the 1U switch mounting bracket:
1.   Line up the holes in the “long side” of the kit’s side brackets with the screw 

holes in the switch. 

2.   With a Phillips screwdriver, fasten the mounting brackets to the switch using 

two 8/32" x 1/2" pan head screws on each side. 

3.   Attach the four cage nuts or clip nuts to the rackmounting flange of the rack 

cabinet so that the nut is positioned on the inside of the rack. 

4.   Mount the switch assembly to the rack cabinet by matching the holes in the “short 

side” of each bracket to an appropriate set of matching holes on your rack 

cabinet. Next, insert the combination hex head screws through the slots in the 
bracket and the holes in the mounting rail, then into the cage nuts or clip nuts.