Black Box KV120E Manual De Usuario
SERVSELECT™ IP INSTALLER/USER GUIDE
30
CHAPTER 4: ANALOG PORT OPERATION
31
To disconnect a user:
1. Press
1. Press
Print Screen
. The Main dialog box will appear.
2. Click Commands - User Status. The User Status dialog box appears.
3. Click the letter of a user to disconnect. The Disconnect dialog box will appear.
Figure 4-10. User Status Dialog Box Figure 4-11. Disconnect Dialog Box
4. Click OK to disconnect the user and return to the User Status dialog box.
-or-
Click X or press
Escape
to exit the dialog box without disconnecting a user.
NOTE:
If the User Status list has changed since it was last displayed, the mouse cursor will turn into an
hourglass as the list is automatically updated. No mouse or keyboard input will be accepted until
the list update is complete.
4.6 Resetting Your Keyboard and Mouse
If your keyboard or mouse locks up during a communication with a CPU that has PS/2
type keyboard and mouse ports, you may be able to re-establish operation by issuing a
reset command. The reset command sends a key sequence to the server which causes the
mouse and keyboard settings to be sent to the appliance. With communication re-
established between the server and the appliance, functionality is restored to the user.
type keyboard and mouse ports, you may be able to re-establish operation by issuing a
reset command. The reset command sends a key sequence to the server which causes the
mouse and keyboard settings to be sent to the appliance. With communication re-
established between the server and the appliance, functionality is restored to the user.
To reset the mouse and keyboard values:
1. Press
1. Press
Print Screen
. The Main dialog box will appear.
2. Click Commands - Reset PS/2. A message box displays indicating that the
mouse and keyboard have been reset.
3. Click X to close the message box.