Black Box KV120E Manual De Usuario
SERVSELECT™ IP INSTALLER/USER GUIDE
36
CHAPTER 5: TERMINAL OPERATIONS
37
5. Terminal Operations
Each individual ServSelect
®
IP may be configured at the unit level through the
configuration port on the back of the unit. All terminal commands are accessed
through a terminal or PC running terminal emulation software.
through a terminal or PC running terminal emulation software.
Configuring the Terminal Menu
The ServSelect IP Terminal Applications menu features five selections: Network
Configuration, Firmware Management, Enable Debug Messages, Set/Change
Password and Exit.
Configuration, Firmware Management, Enable Debug Messages, Set/Change
Password and Exit.
Figure 5-1. Network Configuration Menu
To access the Terminal menu:
1. Connect a terminal or PC running terminal emulation software (such as
1. Connect a terminal or PC running terminal emulation software (such as
HyperTerminal) to the configuration port on the back panel of the ServSelect IP
using a RS-232 DB9 null modem cable. The terminal should be set to 9600 bps,
8 data bits, 1 stop bit, no parity and no flow control. The terminal may be
connected at any time, even when the ServSelect IP is powered on.
2. Press any key to access the main menu.
Network Configuration
The ServSelect IP is configured for network access through the Network
Configuration option. When it is selected, you will have access to the addressing
Network Configuration
The ServSelect IP is configured for network access through the Network
Configuration option. When it is selected, you will have access to the addressing