Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Lenoxx Electronics
  4. CD-106
  5. Manual De Usuario

Lenoxx Electronics CD-106 Manual De Usuario

Descargar
Página de 20
Troubleshooting
Problem
Remedy
The power is not on.
•
 Connect the AC power cord to a wall
outlet securely.
•
 Make sure the batteries are inserted
correctly and they are fresh.
There is no sound.
•
 Make sure the Function Switch is at the
right position as you want.
•
 Adjust the volume.
•
 Unplug the headphones when listening
through speakers.
“
” appears in the display
even when a CD is in place.
•
 Make sure the CD with the label side up.
CD does not play.
•
 Make sure that the CD compartment is
closed.
•
 Place the CD with the label side up.
•
 CD play is paused, press   again.
•
 Remove the CD and leave the CD door
open for about an hour to dry moisture
condensation.
•
 Make sure the Function Switch is at CD
position.
•
 Clean the CD, or replace it if the CD is
badly damaged.
•
 Place the set in a location free from
vibration.
•
 Check if all batteries are fresh.
The sound is weak or of poor
quality.
•
 Replace all the batteries with fresh ones if
they are weak, or bring the set near a
window, or rotate the set (for AM) or  adjust
the FM antenna for best FM reception.
The Record Button does not
function / The tape does not
play.
•
 Make sure the safety tab on the cassette
is in place.
•
 Make sure the Function Switch is at TAPE
position.
The tape does not erase
completely.
•
 Clean the erasing head (see page 17).
•
 Replace all the batteries with fresh ones if
they are weak.
The tape does not record.
•
 Make sure the tape is inserted properly.
•
 Make sure the cassette tab is in place.
The sound is weak / The sound
quality is poor.
•
 Clean the heads, pinch roller and capstan
(see page 17).
General
CD player
Radio
18
The sound drops out.
Tape player
Cassette Play Button pops up.
•
 The tape has reached its end. Remove it,
flip to the other side, re-insert and press
Play.
CD-106081199 AS v.1 E