Black Box KV9804A Manual De Usuario

ServSwitch™ Wizard DP USB

724-746-5500   |   blackbox.com 

Page 28

5.1.3 Selecting a computer using the mouse buttons

Using the mouse buttons, you can quickly switch the keyboard, mouse, video monitor(s), speakers and/or USB peripherals to any 
computer channel.

Note: These procedures work only with three-button or IntelliMouse devices and only if the ‘Mouse Switching’ option has been 
enabled. 

5.1.3.1 To select a computer using the mouse buttons

1  Hold down the middle button (or scroll wheel) of the mouse.

2  Click the left mouse button to increment the channel number or click the right mouse button to decrement the channel. When 

the correct channel is reached, release the middle button. 

  When using this method of switching:

•  The computer channels that are visited depend upon the configuration menu setting (see 5.1.3.2).

•  The ports (KVM, audio and/or USB) that are switched using this method depend upon the switching mode that is currently 

set using the front panel buttons. 

5.1.3.2 Choosing which computers are accessed when using mouse buttons

The computer channels that are visited when you use the mouse buttons (or hotkeys + tab/autoscan) are determined by a setting 
within the Configuration menu: 

1  Enter the Configuration menu. 

2 Press   and then press either: 

 

 to choose 

Cycle all ports, or

 

 to choose 

3 Press 

 to accept the setting and return to the main menu section.

4 Press   and then 

 to exit the menu and save changes.