Black Box ACR1000A Manual De Usuario

Descargar
Página de 46
ServSwitch Agility and Agility Dual
724-746-5500   |   blackbox.com 
Page 26
3.2.8 Remote Microphone & Speakers
ServSwitch Agility (and Agility Dual) remote units can support a microphone as well as speakers providing the necessary connec-
tions have been made between the ServSwitch Agility local transmitter unit and the host computer.
3.2.8.1 To connect a microphone (or line in) and/or speakers on ServSwitch Agility
1  Connect the lead from a mono microphone or, alternatively, a line in connection from an audio device to the 3.5mm socket 
labelled 
LINE IN/MIC IN
 on the rear panel. See Figure 3-19.
LINE IN
/
LINE 
OUT
CON
SOL
E
MIC IN
Connection from 
microphone or line in 
from audio device 
Figure 3-19. Connect the speaker and microphone cables to audio sockets.
2  Connect the lead from stereo speakers to the 3.5mm socket labelled 
LINE OUT
 on the rear panel.
3  Once the unit has been fully connected and powered on, access the RX System Configuration page to check that the Audio 
Input Type setting matches the connection that you have made to the port: linemic or mic boost (the latter provides +20dB 
gain). 
3.2.8.2 To connect a microphone (or line in) and/or speakers on ServSwitch Agility Dual
1  Connect the lead from a mono microphone or, alternatively, a line in connection from an audio device to the 3.5mm socket 
labelled   on the rear panel. See Figure 3-20.
Figure 3-20. Connect the speaker and microphone cables to audio sockets.
2  Connect the lead from stereo speakers to the 3.5mm socket labelled   on the rear panel.
3  Once the unit has been fully connected and powered on, access the RX System Configuration page to check that the Audio 
Input Type setting matches the connection that you have made to the port: linemic or mic boost (the latter provides +20dB 
gain).
AUX
1
Link out to 
speakers
Connection from 
microphone or line in 
from audio device 
Link out to 
speakers