Belkin F1DP116G Manual De Usuario

52

Using the Switch from a Remote Console

You may need to refresh the video image when changing the display attributes of 
a target server.

In the quick-access toolbar, click 

. 

Select “Refresh” or press “Crl+R”.

You may want to manually adjust video to fine-tune the target-server video 
settings, to adapt to a noisy environment or a non-standard VGA signal, or when 
using a full-screen DOS/CLI mode.

In the quick-access toolbar, click 

. 

 Select “Manual video adjust”. A slider bar will appear (see Fig. 18). A red 

frame will also appear around the screen. This represents the screen area 

according to the server’s screen resolution.

 Move the sliders to adjust and change the displayed image. Click in the 

area of the sliders for fine-tuning.
•   Brightness/Contrast—  adjusts the brightness and contrast of the 

displayed image

•   Horizontal Offset— defines the starting position of each line on the 

displayed image

•   Vertical Offset— defines the vertical starting position of the 

display image

•  Phase— defines the point at which each pixel is sampled
•   Noise Level— represents the video noise when a static screen 

is displayed

•   Automated Adjust— when this box is checked, the video adjusts 

automatically whenever there is a change in the screen resolution.