Bay Technical Associates 304 Manual De Usuario

Descargar
Página de 101
Customizing and Managing the BayStack Switches
893-01010-A
3-11
 
Rx CRC Error Frame
This counter increments whenever a frame is received on a particular interface 
that is an integral number of octets in length but does not pass the frame check 
sequence (FCS).
Rx Frame Too Long
This counter increments whenever a frame is received on this port that is 
greater than 1,518 octets in length.
Tx Good Frame
This counter increments whenever a frame is transmitted successfully.
Tx Single Collision
This counter contains a value for the number of frames transmitted on this 
port that had a single collision and were transmitted successfully on the 
second try.
Tx Multiple Collision
This counter contains a value for the number of frames transmitted on this 
port that had more than one collision and were then transmitted successfully 
within 16 attempts. If a frame transmits successfully after only one collision, 
it increments the single collision counter. If there are anywhere from two to 16 
tries for a successful transmission, then the multiple counter increments. If, 
after 16 tries, a collision is still detected, the deferred transmission counter 
increments.
Deferred Transmissions
This counter contains a value for the number of frames transmitted on this 
port that were involved in more than 16 collisions prior to successful 
transmission. 
Tx Late Collisions
This counter contains a value for the number of times a collision on this port 
has been detected later than 512 bit times into the frame duration.
Tx Excessive Collisions
This counter contains a count for the number of frames on this port that, due 
to excessive collisions, are not successfully transmitted.
89301010.BK  Page 11  Tuesday, June 10, 1997  8:00 PM