ZyXEL Communications GS1510-24 Manual De Usuario

Chapter 22 SNMP

GS1510 Series User’s Guide

Use the Trap Receiver screen to enable the sending of SNMP traps to a remote 
SNMP management station(s). Click Management > SNMP > Trap Receiver to 
view the screen as shown.

SNMP traps are used to send out SNMP notifications of urgent or normal events in 
the system to external management stations.

Figure 80   Trap Receiver

The following table describes the labels in this screen. 

Rights

This field displays the community string’s rights. This will be Read Only 
or Read Write.

Network ID of 
Trusted Host

This field displays the IP address of the remote SNMP management 
station after it has been modified by the subnet mask.

Subnet Mask

This field displays the subnet mask for the IP address of the remote SNMP 
management station.

Action

Click Delete to remove a specific Community String.

Table 45   Community Name (continued)

Table 46   Trap Receiver

IP Address

Enter the IP address of the remote trap station in dotted decimal 
notation.

Version

Select the version of the Simple Network Management Protocol to use. v1 
or v2c.

Community 
String

Specify the community string used with this remote trap station.

Apply

Click this to save any changes to the Switch.

Refresh

Click this to reset the contents of the text boxes.

Trap Receiver 
List