ZyXEL Communications GS1510-24 Manual De Usuario
Chapter 15 QoS
GS1510 Series User’s Guide
89
The following table describes the labels in this screen.
15.6 Priority/Queue Mapping
Use the Priority/Queue Mapping Settings screen to configure IEEE 802.1p
priority and queue mappings for the Switch. Click Advanced Settings > QoS >
Priority/Queue Mapping to open the following screen.
priority and queue mappings for the Switch. Click Advanced Settings > QoS >
Priority/Queue Mapping to open the following screen.
Figure 49 Priority/Queue Mapping
Table 23 IP DiffServ (DSCP)
LABEL
DESCRIPTION
Mode
Select Tag Over DSCP if you want to use 802.1p Priority in packets to
prioritize traffic. Select DSCP Over Tag if you want to use DSCP priority to
prioritize traffic, even if the packet has an IEEE 802.1p priority tag.
prioritize traffic. Select DSCP Over Tag if you want to use DSCP priority to
prioritize traffic, even if the packet has an IEEE 802.1p priority tag.
DSCP
This field displays the number of each DSCP service level.
Priority
Select the IEEE 802.1p priority you want to assign to the packets with the
DSCP service level.
DSCP service level.
Note: The changes are not applied until you click Apply.
Apply Click
Apply to save the changes back to the Switch.
Refresh
Click Refresh to begin configuring this screen afresh.