ZyXEL Communications IES-5000 Manual De Usuario
IES-5000 Series User’s Guide
Chapter 3 Hardware Installation and Connections
37
3.4 Making Card Connections
The following describes how to connect the DSL line cards to the splitter chassis cards. For the
management switch card, refer to the card’s User’s Guide for instructions on making the
connections.
management switch card, refer to the card’s User’s Guide for instructions on making the
connections.
3.4.1 DSL Line Card Connections
Use a Telco-50 cable to connect the DSL line card’s front panel Telco-50 connector to the
corresponding splitter card’s front panel Telco-50 connector. Make sure that you use the
appropriate length Telco-50 cables with the DSL line cards; using cables of the wrong length
blocks access to other cards. See the specifications appendix for the lengths of ZyXEL’s
optional Telco-50 cables.
corresponding splitter card’s front panel Telco-50 connector. Make sure that you use the
appropriate length Telco-50 cables with the DSL line cards; using cables of the wrong length
blocks access to other cards. See the specifications appendix for the lengths of ZyXEL’s
optional Telco-50 cables.
Use a long Telco-50 cable to connect a line card’s 1-24 Telco-50 connector to the Telco-50
connector on the corresponding splitter card in the left column (labeled x-1) of the splitter
chassis.
connector on the corresponding splitter card in the left column (labeled x-1) of the splitter
chassis.
Use a short Telco-50 cable to connect a line card’s 25-48 Telco-50 connector to the Telco-50
connector on the corresponding splitter card in the right column (labeled x-2) of the splitter
chassis.
connector on the corresponding splitter card in the right column (labeled x-2) of the splitter
chassis.