Barco DCS-200 Manual De Usuario

Using the Setup Menu

must match the input’s timing. For example, if the input uses NTSC (720 x 480) timing, that 
input cannot use a configuration file that uses WXGA (1280 X 768).

When you delete user-defined configuration files, those files are no longer available for use 
by any input.

For more information about using input configuration files, refer to the following sections:

 

 

 

From the Input Menu, select Reset Config to remove all user-entered configuration 
settings from the current input on Program, and restore the input’s parameters from the 
system’s internal library values. When you select Reset Config, you will be prompted to 
reset (SEL) or continue without resetting (ESC).

Note that if the current format was derived as a best guess, those “guess” values are 
restored when you press SEL.

After you use the Input Menu to change one or more input settings, you can save the 
changes to non-volatile memory by selecting Save Config.  You can save the changes to 
the current configuration file for the selected input, or to a different file.

„

 To save changes to an input’s configuration, use the following procedure:

1.  Select Save Config from the Input Menu.  The menu shown in the following 

illustration appears:

Figure 4-30.  Save Config Menu (sample)

2.  Select a value for File Number, or keep the default file number.

Resetting  configuration parameters does not change the 
configuration file associated with the input — it simply assigns 
the restored parameters to the existing configuration file. The 
file number shown in the File Association Menu does not 
change.

S A V E   C O N F I G
> F i l e   N u m b e r

2 4

S a v e   F i l e