ZyXEL Communications GS-1524 / GS-1548 Manual De Usuario

Chapter 5 System

GS-1524/GS-1548 User’s Guide

Use the Configure IP Address screen to set up the IP address manually. The 
following screen appears when you click the existing IP address in the System > 
Status screen.

Figure 22   Configure IP Address 

The following table describes the labels in this screen.

IP Address

This field indicates the IP address of the Switch. 

You can click the existing IP address to change it. See 

Subnet Mask

This field indicates the subnet mask of the Switch.

Gateway

This field indicates the IP address of the default gateway. 

L2 Table 
Aging

This field displays whether the L2 Table Aging is enabled or disabled. Click 
Enabled/Disabled to change the L2 Table Aging settings.

Backup 
settings

Click this link to create and save a backup configuration file. See 

Restore 
settings

Click this link to upload an existing configuration file to the Switch. See 

Table 5   System  (continued)

Table 6   Configure IP Address

IP Address

Enter the IP address of your Switch in dotted decimal 
notation. For example, 192.168.1.1. 

Network Submask

Enter the IP subnet mask of your Switch in dotted 
decimal notation for example 255.255.255.0. 

Gateway

Enter the IP address of the default outgoing gateway in 
dotted decimal notation, for example 192.168.1.5.