ZyXEL Communications GS-1524 / GS-1548 Manual De Usuario

Chapter 17 Event Logging

GS-1524/GS-1548 User’s Guide

Use this screen to specify which system events should be recorded and where the 
log messages should be saved. Click Logging > Settings in the navigation panel 
to view the screen as shown.

Figure 54   Logging 

The following table describes the labels in this screen. 

Table 33   Logging 

Add Server

Click this to configure a new syslog server. 

Logging 
Target

Click the RAM or Flash link to view the logs stored on the Switch.

Use the columns on the right to select the types of system events each 
logging target should record. Select:

• Error - to record system failures, such as events which will cause the 

Switch to malfunction and events such as invalid user input in the web 

configurator.

• Warning - to record non critical errors on the Switch. The Switch will 

continue to function when warnings are recorded.

• Info - to record regular system events, such as configuration changes 

or logins.

• Debug - to record events which can be helpful for engineering 

debugging of the Switch’s function. This field is not recommended to 

track as it creates many messages not helpful to typical users.

For RAM and Flash logs, you can also hit Clear to delete all log entries.

For each Server log you configured you can hit Delete to remove this 
syslog server from logging system events for the Switch.

Apply

Click Apply to save your changes.