McDATA 4500 Manual De Usuario
4
4-4
Using Logs
Audit Log
The audit log displays a history of all configuration changes applied
to the switch from any source such as Product Manager, SNMP
management stations, web server interface, host, or another switch.
to the switch from any source such as Product Manager, SNMP
management stations, web server interface, host, or another switch.
Figure 4-2
Audit Log
•
Date/Time
The date and time of the change on the switch.
Some actions, such as backing up configuration data and enabling
automatic date/time synchronization, are performed only by the
EFC Server without switch interaction. These actions are
indicated by the string, (EFC), following the audit log’s stamp of
the EFC Server’s date and time (refer to
automatic date/time synchronization, are performed only by the
EFC Server without switch interaction. These actions are
indicated by the string, (EFC), following the audit log’s stamp of
the EFC Server’s date and time (refer to
). If the string,
(EFC), is not displayed, the time stamp is from the switch.
•
Action
User action that caused the configuration change, such as offline
status, port name change, or change of address.
status, port name change, or change of address.
•
Source
Identifies the user making the change through the switch Product
Manager and IP or DNS host name address of the remote user’s
workstation.
Manager and IP or DNS host name address of the remote user’s
workstation.
— Maintenance Port: Change was made by a user connected to
the maintenance port.
— EFC Manager: Change was made by an Product Manager user.