Meridian America 21 Manual De Usuario
Miscellaneous equipment
Note:
This kit does not include the cable tray.
Earthquake Bracing Kit
System Hardware-All
Purpose-Provides a means to hold together all modules that are stacked
up in vertical expansion so that in the case of an earthquake, the whole
up in vertical expansion so that in the case of an earthquake, the whole
column will move as a unit. Used only for non-raised floor. Each kit
contains the following:
contains the following:
four threaded rods
two tie bars
miscellaneous hardware (nuts and washers)
Three different Earthquake Bracing Kits are available:
two-tier
three-tier
four-tier
Channel Service Unit
Purpose-When required under FCC regulations (FCC
provides a
channel digital interface between a
and
line when connecting to
registered common carrier trunks.
TELLABS 251
Digital Echo
Purpose-For use
when echo control is required on voice
calls.
BIX Cross-Connect System
Purpose-The BIX In-Building Cross-Connect System provides modular
terminations and cross-connections for Meridian 1 system. (See
63 1-451 l-100 for ordering information for the BIX system and Table 5 for
designation label ordering information.)
terminations and cross-connections for Meridian 1 system. (See
63 1-451 l-100 for ordering information for the BIX system and Table 5 for
designation label ordering information.)
Equipment identification and ordering information
553-3001-l 54