ZyXEL Communications ES-1016/1024B Manual De Usuario
ES-1016B/1024B User’s Guide
Chapter 2 Hardware Description and Connection
17
C
H A P T E R
2
Hardware Description and
Connection
2.1 Rear Panel
The three-pronged power receptacle is located on the rear panel of the switch. Refer to the
for power specification.
Figure 5 Rear Panel
2.1.1 Rear Panel Power Connection
Connect one end of the supplied power cord to the power receptacle on the back of the switch
and the other end to the appropriate power source.
and the other end to the appropriate power source.
2.2 Front Panel
The front panel of the switch includes the auto-negotiating 10Base-T/100Base-TX RJ-45 ports
and the LEDs.
and the LEDs.
2.2.1 RJ-45 Auto-negotiating Ports
The 10Base-T/100Base-TX RJ-45 ports are auto-negotiating and auto-crossover.
An auto-negotiating port can detect and adjust to the optimum Ethernet speed (10/100Mpbs)
and duplex mode (full duplex or half duplex) of the connected device.
and duplex mode (full duplex or half duplex) of the connected device.
An auto-crossover (auto-MDI/MDI-X) port automatically works with a straight-through or
crossover Ethernet cable.
crossover Ethernet cable.