Delta Electronics RTU-EN01 Manual De Usuario

 

DVP-PLC Operation Manual 

32 

 

3. Word 

device 

For setting up the addresses for the word type serial slave device and reading or the content in the 

designated slave. 

„

 Station 

address: 

Enter the address of slave to be monitored. (Max. 16 slaves) 

„

 MODBUS 

(Hex): 

Enter the 4-digit hex Modbus address of the slave to be monitored. 

„

 MODBUS 

(Dec): 

Enter the 6-digit decimal Modbus address of the slave to be monitored. 

„

 Account: 

Enter the number of slaves to be monitored continuously (Max. 100). 

f Once the information of slave monitoring is set, click "Apply" to save the setting and start the 

monitoring. Incomplete device information will be deleted. 

„

 Format: 

Select the format of the register to be monitored, decimal (Dec), hexadecimal (Hex) or 

binary. 

„

 Start/Stop 

monitor 

Start or stop the saved and applied device number to be monitored. Unapplied saved 

settings will be deleted. 

Note: 

The default is in cache enabled mode. You can set up maximum 16 sets of slave information for 

the monitored bits and words (Max. 100 data). Under the cache mode, you are able to send the 

read data back to the registers in RTU-EN01.