Minicom Advanced Systems 5UM70156 V1.1 12 Manual De Usuario
USER GUIDE
35
5.7.2.2 The Network tab elements
Click the Network tab. The following appears.
Figure 38 Network tab
Here you configure and modify Network parameters and security levels of the IP
Access device.
Access device.
Interface I and II represent the 2 LAN interfaces on the IP Access.
In First TCP Port type a TCP port number (above 800) – choose three consecutive
ports, and enter the first port number of the series.
ports, and enter the first port number of the series.
Click to clear or select the following according to your requirements:
Enable Encryption – Check this box for secure connection, otherwise disable it. If
enabled, the Internet Explorer at the Remote PC must support 128bit Encryption. If
IP Access is already in secure mode you must check the Enable Encryption box.
enabled, the Internet Explorer at the Remote PC must support 128bit Encryption. If
IP Access is already in secure mode you must check the Enable Encryption box.
Use DHCP – Enable DHCP to provide you with dynamic IP addressing for IP
Access, if a DHCP server exist.
Access, if a DHCP server exist.
Active – Enable/disable Network activity of the IP Access via KVM.net.