3M VOL-1081 Manual De Usuario
Page 6
LED Indicators
ÿ
The following table describes the LED status and description. The LEDs provide a
real-time indication of system conditions.
real-time indication of system conditions.
Rear Panel
The 3-pronged power plug is located at the Rear Panel of the Mini-switch as shown
in Figure 2-2. The Switch will work with 100-240V AC, 50-60Hz.
in Figure 2-2. The Switch will work with 100-240V AC, 50-60Hz.
Figure 2-2 The Rear Panel of the VOL-1081 Fiber Switch
LED
Status
Color
Description
Power
On
Green
Power On
On
Green
The port is operating at the speed of 100Mbps.
100 Mb
Off
In 10Mbps mode or no device attached
On
Green
The port is successfully connecting with the device.
Blinks
The port is receiving or transmitting data.
Lnk /
Act
Off
No device attached.
On
Yellow
The port is operating in Full-duplex mode.
Blinks
Collision of Packets occurs in the port.
Fdx /
Col
Off
Half-duplex mode or no device attached.