Motorola WS5100 Manual De Usuario
Switch Security
6-65
authentication source if a user does not exist in the local Server’s database, since the primary method has
rejected the authentication attempt.
rejected the authentication attempt.
6.9.3 Defining the Radius Configuration
To configure Radius support on the switch:
1. Select
Security
>
Radius Server
from the main menu.
2. Ensure the
Configuration
tab is selected.
3. Click the
Start
the RADIUS server
link to use the switch’s own Radius server to authenticate users
accessing the switch managed network.
4. Set a
Timeout
value (between 5 and 10 seconds) to define how long the switch waits for a reply to a
Radius request before retransmitting the request. The default value is 5.
Ensure the value is set long enough to compensate for the heaviest periods of data traffic within the
switch managed network.
switch managed network.
5. Set a
Retires
value (between 3and 6) to define the number of times the switch transmits each Radius
request to the server before giving up. The default value is 3.
6. Click the
Apply
button to save the changes made to within the Global Settings field.
7. Click the
Revert
button to cancel any changes made within the Global Settings field and revert back to
the last saved configuration.
NOTE: The appearance of the bottom portion of the Configuration tab differs depending
on whether
on whether
Clients
or
Proxy Servers
is selected. Select the Clients tab to display the IP
Address and Subnet Mask of existing Radius clients. Existing clients can be modified or
new clients added. For more information, see
new clients added. For more information, see
.
Select the Proxy Servers tab to display the ID suffix, IP Address and Port Number of
existing Radius proxy servers. Existing servers can be modified or new proxy servers
added. For more information, see
existing Radius proxy servers. Existing servers can be modified or new proxy servers
added. For more information, see
.