American Power Conversion AP9615 Manual De Usuario

7

3 Use  a 

#2

 Phillips head screwdriver to remove the 2 

screws fastening the SmartSlot cover plate to the 
back panel of the 

UPS

 or triple chassis. Keep the 

screws for Step 

5

 below. Save the SmartSlot cover 

plate for future use (e.g. shipping the 

UPS

).

4 Orient the hub to fit into the SmartSlot. Slide the hub 

all the way into the slot until its front panel is flush 
with the back panel of the UPS or triple chassis. 
Observe the correct orientation as shown in Figure 3. 
Note that the sides of the circuit board align with the 
card guides of the SmartSlot. 

.