Alcatel Carrier Internetworking Solutions 7700 Manual De Usuario

16

Installing the Hardware

Note. The diagram below is a representation only; the 

physical appearance of the actual MiniGBIC may vary.

Caution. The MiniGBIC should slide in easily. Do not 
force it into the slot. If any resistance is encountered, 
ensure the MiniGBIC is aligned properly. Forcing the 
MiniGBIC into the slot can damage the unit, as well as 
components on your GNI module.

Note. To remove a MiniGBIC, you must first open the 
MiniGBIC’s hinged face to approximately ninety degrees. 
Then, grasp the hinged face and carefully pull the 
MiniGBIC straight out of the slot.

Blank cover plates are factory-installed in the chassis and are 
used to cover empty CMM and NI slots, as well as empty 
power supply bays. 

These cover plates play an important role in chassis airflow 
and temperature management. They also provide protection for 
module processor boards and other sensitive internal switch 
components by closing off a chassis that is not fully populated.

Because they regulate airflow and help protect internal chassis 
components, blank cover plates should remain installed at 
empty module slots and power supply bays at all times.