Alcatel Carrier Internetworking Solutions 7700 Manual De Usuario

34

CLI Basics

The following table lists some basic CLI commands that will 
help you get acquainted with the CLI interface. Enter each 
command exactly as shown. For complete descriptions of 
these commands, refer to your CLI Reference Guide.

Saves current configuration 
changes to the /flash/working 
directory’s boot.cfg file. For 
more information, refer to 

Displays the current running 
directory. For more informa-
tion, refer to 

Creates a new VLAN.

Displays a list of VLANs 
configured on the switch.

Configures an IP interface to 
enable IP routing on a VLAN.

Displays basic configuration 
and status information for the 
switch chassis.

Displays basic information for 
switches in a stacked configu-
ration.

Displays basic hardware and 
status information for a stand-
alone switch, or for all 
switches installed in a stacked 
configuration.

Displays basic hardware and 
status information for a stand-
alone switch, or for the primary 
or secondary switches installed 
in a stacked configuration.

Displays basic information 
about the switch.

Displays the version of 
software currently installed on 
the switch. 

Modifies the amount of time 
before Telnet and console 
sessions time out.

Displays all active login 
sessions (e.g., Console, Telnet, 
FTP, HTTP, Secure Shell, 
Secure Shell FTP)

Ends the current Telnet or 
console session.