Alcatel Carrier Internetworking Solutions 6600 Manual De Usuario
Configuring High Availability VLANs
page 3-12
Release 5.1.6.R02 User Guide Supplement
June 2005
Assigning and Removing Egress Ports
The following subsections describe how to assign to and remove egress ports from a high availability
VLAN with the
VLAN with the
vlan port-mac egress-port
command.
Note. Using the vlan port-mac egress-port command will change a standard VLAN to a high availability
VLAN. Standard VLAN commands do not apply to high availability VLANs.
VLAN. Standard VLAN commands do not apply to high availability VLANs.
Assigning Egress Ports
To assign egress ports to a high availability VLAN you use the vlan port-mac egress-port command by
entering vlan, followed by the VLAN’s ID number, port-mac egress-port, the slot number of the port, a
slash (/), and the port number.
entering vlan, followed by the VLAN’s ID number, port-mac egress-port, the slot number of the port, a
slash (/), and the port number.
For example, to add egress port 1/5 to high availability VLAN 20 you would enter:
-> vlan 20 port-mac egress-port 1/5
You can also add multiple egress ports by entering vlan, followed by the VLAN’s ID number, port-mac
egress-port, the slot number of the first port, a slash (/), the port number of the first port, a space, the slot
number of the second port, a slash, and the port number of the second port. Additional ports can also be
added by specifying their slot number, a slash, and their port number preceded by a space.
egress-port, the slot number of the first port, a slash (/), the port number of the first port, a space, the slot
number of the second port, a slash, and the port number of the second port. Additional ports can also be
added by specifying their slot number, a slash, and their port number preceded by a space.
Note. Egress ports that belong to the same high availability VLAN do not need to be sequential and can be
on different second-generation NI modules.
on different second-generation NI modules.
For example, to add egress port 1/5, 6/2, and 8/3 to high availability VLAN 20 you would enter:
-> vlan 20 port-mac egress-port 1/5 6/2 8/3
You can also add a range of egress ports by entering vlan, followed by the VLAN’s ID number, port-mac
egress-port, the slot number of the first port, a slash (/), the port number of the first port on the NI, a
hyphen (-), and the last port on the NI.
egress-port, the slot number of the first port, a slash (/), the port number of the first port on the NI, a
hyphen (-), and the last port on the NI.
For example, to add egress port 3/4 through 3/8 to high availability VLAN 20 enter:
-> vlan 20 port-mac egress-port 3/4-8
You can add multiple and ranges of egress ports in the same command line. For example, to add egress
ports 1/5, 3/4 through 3/8, 6/2, and 8/3 to high availability VLAN 20 you would enter:
ports 1/5, 3/4 through 3/8, 6/2, and 8/3 to high availability VLAN 20 you would enter:
-> vlan 20 port-mac egress-port 1/5 3/4-8 6/2 8/3
Removing Egress Ports
To remove egress ports from a high availability VLAN, use the no form of the vlan port-mac egress-port
command by entering vlan, followed by the VLAN’s ID number, port-mac no egress-port, the slot
number of the port, a slash (/), and the port number.
command by entering vlan, followed by the VLAN’s ID number, port-mac no egress-port, the slot
number of the port, a slash (/), and the port number.
For example, to remove egress port 1/5 from high availability VLAN 20 you would enter:
-> vlan 20 port-mac no egress-port 1/5